210 Loader Specifications on 2210 Tractor1

W05238

Dimensions are in compliance with ASAE standard S301.3.

1(Specifications and design subject to change without notice.)

OUO6077,00015E6 -19-31JUL02-1/2

Tractor Model 2210 4WD
Front Tires 18 x 8.50-14
Rear Tires 26 x 12.00-12
Wheelbase (I) 1450 mm (57 in.)
Material Bucket
Width 1250 mm (49.2 in.)
Length 618 mm (24.3 in.)
Mass 70 kg (154 lb)
Hydraulic System
Rated Flow 20.8 L/Min (5.5 gal/min)
Maximum Pressure 13,700 kPa (137 bar) (1987 psi)
Cycle Times (in seconds)
Loader Raising Time 3.8 s
Loader Lowering Time 2.0 s
Bucket Dumping Time 2.4 s
Bucket Rollback Time 3.4 s
Maximum Lift Height
To Pivot Pin (A) 1740 mm (68.5 in.)
Clearance
Bucket Level (B) 1582 mm (62 in.)
Bucket Dumped (C) 1280 mm (50 in.)
Overall Length (I+F) 2725 mm (107.2 in.)
Digging Depth (H) 200 mm (7.9 in.)
Reach
At Max Lift Height (D) 615 mm (24.2 in.)
Bucket on Ground (F) 1275 mm (50.2 in.)
Angles
Max Dump (E) 47.2°
Max Dump at Ground 124°
Max Rollback (G) 26.5°
Rollback at Full Height (SAE) 98.2°
Overall Height
In Carry Position (J) 1105 mm (43.5 in.)
Lift Capacity
To Max Height at Pivot Point (U) 282 kg (622 lb)
To Max Height (V) 198 kg (437 lb)
To 1.5 m (59 in.) at Pivot Point (W) 327 kg (721 lb)
To 1.5 m (59 in.) (X) 236 kg (520 lb)
With Forklift to Max Height (U) 234 kg (516 lb)
Breakout Force
At Pivot Point (Y) 7017 N (1577 lb force)
500 mm (19.7 in.) Forward of Pivot Point (Z) 4768 N (1072 lb force)
Bucket Rollback Force
At Max Height (VV) 5750 N (1293 lb force)
At 1.5 m (59 in.) Lift Height (XX) 6621 N (1488 lb force)
At Ground Level Line (ZZ) 7343 N (1650 lb force)

 

OUO6077,00015E6 -19-31JUL02-2/2