Prepare the Tractor

1. Prepare the tractor for the loader. Refer to Preparing the Tractor section for the following:

  • Approved tractors
  • Removing front weights
  • Tire requirements
  • Tread settings
  • Rear ballast requirements

2. 4000 Series Tractors; Inspect weight bracket.

3. 855, 870 and 955 Tractors; Install weight bracket and mounting frames. (Refer to Installation Instructions included in separate bundle.)

4. Install hood guard.

  • 4000 Series Tractors; Refer to Installation Instructions included in separate bundle.
  • 870, 855 and 955 Tractors; Not installed until after loader is attached. (See ATTACH LOADER TO TRACTOR in this section.)

OUO6038,0001925 -19-15MAR04-1/2

5. Install latch plate retainer (A). (Refer to Installation Instructions included in separate bundle.)


A-Latch Plate Retainer

W04150

OUO6038,0001925 -19-15MAR04-2/2