Adjusting Front Fenders (30, 40, 50 and 55 MFWD Row Crop Tractors)

To provide maximum clearance with loader, adjust fenders to the lowest and most outward position possible.

1. Install fender support (A) in the most outward position. Tighten to specification.

Specification

Fender Support Hardware -Initial Torque 90 N·m (65 lb-ft)

2. Position spacer (B) between fender bracket (C) and support (A). Install bracket (C) in lowest position. Tighten to specification.

Specification

Bracket Hardware -Torque 225 N·m (166 lb-ft)

3. Center fender over tire using hardware (D).


A-Fender Support
B-Spacer
C-Fender Bracket
D-Hardware

W13133
W06563

OUO6077,00016E6 -19-10FEB07-1/2

4. Move fender support (A) to most rearward position. Tighten to specification.

Specification

Fender Support Hardware -Final Torque 225 N·m (166 lb-ft)


A-Fender Support

W13134

OUO6077,00016E6 -19-10FEB07-2/2