Loader Required Minimum Ballasting
|
|
The amount of ballast listed in the chart is the minimum required for normal loader operation. For some operations, additional ballast may be required to maximize stability. |
CAUTION:
To help prevent the possibility of personal injury or death caused by tractor/loader roll over, DO NOT operate tractor/loader unless it is equipped with proper ballast.
| BALLAST REQUIREMENTS FOR ALL 5000 SERIES TRACTORS EXCEPT 5105 AND 5205 | |
|---|---|
| Option | Ballasta |
| 1 | 335 kg (740 lb) Ballast per Wheel with no Hitch Ballast |
| 2 | 150 kg (330 lb) Ballast per Wheel and 300 kg (660 lb) of Hitch Ballast |
| 3 | 75 kg (165 lb) Ballast per Wheel and 600 kg (1325 lb) of Hitch Ballast |
| aBallast given is minimum required with rear tread set at 1600 mm (63 in.). | |
| BALLAST REQUIREMENTS FOR 5105 AND 5205 TRACTORS | |
|---|---|
| Option | Ballasta |
| 1 | 500 kg (1100 lb) Ballast per Wheel and 500 kg (1100 lb) of Hitch Ballast |
| 2 | 300 kg (660 lb) Ballast per Wheel and 800 kg (1760 lb) of Hitch Ballastb |
| 3 | 150 kg (330 lb) Ballast per Wheel and 1000 kg (2200 lb) of Hitch Ballastb |
| aBallast given is minimum required with rear tread set at 1600 mm (63 in.). | |
| bSee ADDING BALLAST TO HITCH in this section. | |
OUO6038,0001A6D -19-29JUN04-1/1 |