|
After the loader has been completely installed, inspect it to be sure it is in good working condition before delivering it to the customer. The following checklist is a reminder of important points to inspect. Check off each item as it is found satisfactory or after proper adjustment has been made.
[ ] Loader has been installed correctly.
[ ]
Loader mounting hardware is tightened to correct torque.
[ ] Tractor is properly ballasted.
[ ] Wheel tread is properly set.
[ ] Loader has been lubricated.
[ ] Loader responds correctly to controls.
|
[ ] Hydraulic connections do not leak.
[ ] Tractor transmission/hydraulic oil level is correct.
[ ] All decals are in place and readable.
[ ] Scratches are painted.
[ ] Hoses do not contact any sharp edges or hang too low below tractor.
[ ] This loader has been inspected and checked. To the best of my knowledge, it is ready for delivery to the customer.
(Date Set Up)________________________
(Signature)_________________________
|