IMPORTANT: Single wheel should always face away from machine for all applications. DO NOT remove spindle and position with wheel on inside of suspension arm.

NOTE: Wheels shown positioned away from machine centerline.

Wheels should be spaced out to maximum width (away from machine centerline) (A), as shown.

Wheels can be installed in two positions to accommodate spacing for row crops:

• Away from machine centerline (A)
• Toward machine centerline (B)

Refer to WHEEL SPACING DIAGRAM FOR ROW CROPS in this section.

There are two holes in wheel spindles. Position wheels to desired location by sliding spindle side-to-side. (See POSITIONING WHEELS in this section.)

OUMX005,00014D6 -19-20JUN06-1/1