Using Correct Blades

Three blades are available:

  • Offset suction blade (A): Used to lift, then cut heavily matted or fallen material such as old pastures.
  • Flat suction blade (B): Used as the upper blade in dual blade applications for increased stalk shredding.
  • Offset non-suction blade (C) (Available for HX20 and CX20 bar-type holders only.): Used while cotton shredding to reduce mud build-up.

NOTE: HX20 and CX20 pan-type blade holders and bar-type blade holders use different length blades. Approximate blade lengths are as follows:

  • Pan-Type-668 mm (26-1/4 in.)

  • Bar-Type-552 mm (21-3/4 in.)

W07779


A-Offset Suction Blade
B-Flat Suction Blade
C-Offset Non-Suction Blade

OUO6038,0001CF2 -19-20JUN06-1/1