Install Front Safety Shield-Chains (If Equipped)

IMPORTANT: Install hardware with nuts and washers on the outside of cutter.

LX4 and LX5; Install shield using four M12 x 35 cap screws, washers, and lock nuts (A). Tighten to specifications.

LX6; Install shield using six M12 x 35 cap screws, washers, and lock nuts (A). Tighten to specifications.

Specification

Lock Nuts -Torque 90 N·m (66 lb-ft)

W05089

LX6 Shown


A-Lock Nut, Washer, and Cap Screw, M12 x 35

OUMX005,0001B9D -19-22MAR05-1/1