Every 50 Hours

IMPORTANT: Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

6000 and 7000 Series Tractors with 4-Cylinder Engine

Specification

Mounting Frame-to-Tractor Frame Cap Screws (A) -Torque 580 N·m (428 lb-ft)
Mounting Frame-to-Tractor Frame Cap Screws (B) -Torque 620 N·m (457 lb-ft)


A-Cap Screws, M20
B-Cap Screws, M20

W09430

6D Series Tractors (Right-Hand Side Shown)

W08061

All Other 4-Cylinder Tractors (Left-Hand Side Shown)

LD45720,000013F -19-21OCT08-1/9

6000 and 7000 Series Tractors with 6-Cylinder Engine

Specification

Mounting Frame-to-Tractor Frame Cap Screws (A) -Torque 620 N·m (457 lb-ft)
Mounting Frame-to-Tractor Frame Cap Screws (B) -Torque 580 N·m (428 lb-ft)


A-Cap Screws, M20
B-Cap Screws, M20

W08062

Left-Hand Side Shown

LD45720,000013F -19-21OCT08-2/9

Mounting Frame Hardware-5200, 5300, and 5400 Tractors

IMPORTANT: Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

Mounting Frame Hardware
Location Description Size Torque Specification
A Cap Screw
Flat Washer		 M16 x 50
17 x 34 x 4 mm		 275 N·m
(200 lb-ft)
B Cap Screw
Flat Washer		 M20 x 65
21 x 42 x 5 mm		 530 N·m
(400 lb-ft)
C Spacer    

 


A-Cap Screws, M16 x 50
B-Cap Screw, M20 x 65
C-Spacer

W09920

LD45720,000013F -19-21OCT08-3/9

Mounting Frame Hardware-5210, 5220, 5310, and 5320 Tractors

IMPORTANT: Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

Mounting Frame Hardware
Location Description Size Torque Specification
A Cap Screw
Flat Washer		 M16 x 50
17 x 34 x 4 mm		 275 N·m
(200 lb-ft)
B Cap Screw
Flat Washer		 M20 x 65
21 x 42 x 5 mm		 530 N·m
(400 lb-ft)
C Spacer    
D Cap Screw
Flat Washer		 M16 x 70
17 x 34 x 4 mm		 275 N·m
(200 lb-ft)

 


A-Cap Screw, M16 x 50
B-Cap Screw, M20 x 65
C-Spacer
D-Cap Screw, M16 x 70

W09919

LD45720,000013F -19-21OCT08-4/9

Mounting Frame Hardware-5500 Tractors

IMPORTANT: Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

Mounting Frame Hardware
Location Description Size Torque Specification
C Cap Screw
Flat Washer		 M16 x 50
17 x 34 x 4 mm		 275 N·m
(200 lb-ft)
D Cap Screw
Flat Washer		 M20 x 65
21 x 42 x 5 mm		 530 N·m
(400 lb-ft)
F Cap Screw
Flat Washer
Flange Nut		 M20 x 65
21 x 42 x 5 mm
M20		 530 N·m
(400 lb-ft)

 


A-Mounting Frame
B-Cross Tie
C-Cap Screws, M16 x 50
D-Cap Screw, M20 x 65
E-Spacer
F-Cap Screw, M20 x 65

W09905

LD45720,000013F -19-21OCT08-5/9

Mounting Frame Hardware-5410, 5420, 5510, and 5520 Tractors

IMPORTANT: Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

Mounting Frame Hardware
Location Description Size Torque Specification
C Cap Screw
Flat Washer		 M16 x 50
17 x 34 x 4 mm		 275 N·m
(200 lb-ft)
D Cap Screw
Flat Washer		 M20 x 65
21 x 42 x 5 mm		 530 N·m
(400 lb-ft)
F Cap Screw
Flat Washer
Flange Nut		 M20 x 65
21 x 42 x 5 mm
M20		 530 N·m
(400 lb-ft)
G Cap Screw
Flat Washer		 M16 x 70
17 x 34 x 4 mm		 275 N·m
(200 lb-ft)

 
W09912


A-Mounting Frame
B-Cross Tie
C-Cap Screw, M16 x 50
D-Cap Screws, M20 x 65
E-Spacer
F-Cap Screws, M20 x 65
G-Cap Screw, M16 x 70

LD45720,000013F -19-21OCT08-6/9

Mounting Frame Hardware-5225 and 5325 Tractors

IMPORTANT: Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

Tighten hardware to specification in the sequence shown.

Specification

Hardware (A and B) -Torque 610 N·m (450 lb-ft)
Hardware (C) -Torque 530 N·m (390 lb-ft)


A-Cap Screw, M20 x 100 (2 used)
B-Cap Screw, M20 x 90 (2 used)
C-Cap Screw, M20 x 55 (2 used)
D-Washer, 21.4 x 42 x 5 mm (4 used)
E-Spacer, 23 x 50 mm (2 used)

W09956
W09802

LD45720,000013F -19-21OCT08-7/9

Mounting Frame Hardware-5425, 5525, 5603, 5083E Limited, 5093E Limited, 5101E Limited, and 5625 Tractors

IMPORTANT: Avoid damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

Tighten hardware to specification in the sequence shown.

Specification

Cap Screw (A) -Torque 530 N·m (390 lb-ft)
Cap Screw (C) -Torque 610 N·m (450 lb-ft)


A-Cap Screw, M20 x 55, (4 used)
B-Washer, 21.4 x 42 x 5 mm, (6 used)
C-Cap Screw, M20 x 90, (2 used)

W09957
W09960

LD45720,000013F -19-21OCT08-8/9

Mounting Frame Hardware-5M Series Tractors

IMPORTANT: Avoid damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.

NOTE: Side discharge pipe (B) (if equipped) must be removed to access the left-hand mounting frame cap screws.

If equipped with side discharge pipe (B), loosen clamp (C) and remove pipe to access left-hand mounting frame cap screws.

Tighten hardware to specification.

Specification

Cap Screw (A) -Torque 625 N·m (460 lb-ft)


A-Cap Screw, M20 x 110, (10 used)
B-Side Exhaust Pipe
C-Clamp

W09970
W20039

Side Exhaust (If Equipped)

LD45720,000013F -19-21OCT08-9/9