Leveling Bucket

NOTE: Top of bucket has a "flat top" feature to help operator to determine that bucket is level.

Bucket/attachment should be level when top of rod (A) is flush with tube (B).

NOTE: Indicator position for a bucket will not be the same for an attachment.

When using level indicator for an attachment other than a bucket: Level the attachment, loosen clamps (C), move tube (B) up or down bucket cylinder (D), and tighten clamps.

A-Level Indicator Rod
B-Tube
C-Clamps
D-Bucket Cylinder

OUMX005,0001E23 -19-22SEP06-1/1