|
1.
Prepare the tractor.
a.
Refer to Preparing the Tractor section.
b.
Install mounting frames.
c.
Install toolbox support bracket and toolbox.
d.
Install hood guard.
e.
Install mid-mount couplers and hoses.
f.
Install hydraulic valves and controls as needed.
2.
Prepare the loader.
a.
Remove shipping banding, wire and dunnage.
|
b.
Lower loader to the ground.
c.
Install third-function oil lines and hoses, if ordered.
d.
Install loader-to-mid-mount couplers hydraulic hoses.
3.
Position loader on mounting frames.
4.
Install bucket/attachment carrier.
5.
Install bucket/attachment.
6.
Perform final inspection and adjustments.
7.
Install optional equipment/attachments.
|