Leveling in Reverse

IMPORTANT: To avoid damage to loader or bending the bucket cutting edge on a solid object while leveling in reverse, position the bucket less than 40° below level. Use FLOAT to reduce down pressure.

NOTE: An optional Pressure Relief Manifold is available to reduce force on bucket cutting edge and bucket cylinders when objects are hit while leveling in reverse. (See your John Deere dealer for more information.)

1. Position bucket 40° or less below level.

2. Use FLOAT to reduce down pressure.

3. Back up slowly.

OUO6038,0001D2A -19-29SEP06-1/1