Every 50 Hours
IMPORTANT: Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.
W09430-UN-21MAY08
6D Series Tractors (Right-Hand Side Shown)
W08061-UN-21AUG06
All Other 4-Cylinder Tractors (Left-Hand Side Shown)
A - Cap Screws, M20
B - Cap Screws, M20
Tractors with 4-Cylinder Engine| Item | Measurement | Specification |
| Mounting Frame-to-Tractor Frame Cap Screws (A) | Torque | 580 N•m (428 lb-ft) |
| Mounting Frame-to-Tractor Frame Cap Screws (B) | Torque | 620 N•m (457 lb-ft) |
W08062-UN-21AUG06
Left-Hand Side Shown
A - Cap Screws, M20
B - Cap Screws, M20
Tractors with 6-Cylinder Engine| Item | Measurement | Specification |
| Mounting Frame-to-Tractor Frame Cap Screws (A) | Torque | 620 N•m (457 lb-ft) |
| Mounting Frame-to-Tractor Frame Cap Screws (B) | Torque | 580 N•m (428 lb-ft) |
OUMX005,0001E26-19-20080610 |
