Every 10 Hours


H340, H360, and H380 Hydraulic Self-Leveling Loaders

NOTE:

W21852
W21852-UN-15SEP11

Lubrication Points (H360 Hydraulic Self-Leveling Loader Shown)

Roll back bucket and lower loader to ground to access all lubrication points.

Lubricate 24 fittings, 12 on each side of loader.


H340, H360, and H380 Mechanical Self-Leveling Loaders

NOTE:

W21706
W21706-UN-23AUG11

Lubrication Points (H360 Mechanical Self-Leveling Loader Shown)

Roll back bucket and lower loader to ground to access all lubrication points.

Lubricate 26 fittings, 13 on each side of loader.


H340 and H360 Non Self-Leveling Loaders

NOTE:

W21707
W21707-UN-23AUG11

Lubrication Points (H360 Non Self-Leveling Loader Shown)

Roll back bucket and lower loader to ground to access all lubrication points.

Lubricate 20 fittings, 10 on each side of loader.


H480 Loader

NOTE:

W21518
W21518-UN-25MAR11

Roll back bucket and lower loader to ground to access all lubrication points.

Lubricate 26 fittings, 13 on each side of loader.


Grapple for H480 Loader

W21034
W21034-UN-30SEP10

Lubricate fitting on back of both pivot arms.

Apply grease, oil or spray lubricant to cylinder pivots.


Latch Pins

W20954
W20954-UN-26MAY10

Clean and lubricate latch pins on both sides of carrier. Make sure pins engage freely.

OUO6074,0000B1F-19-20110927