-
IMPORTANT: Hardware torque MUST be checked after the first 10
hours and every 50 hours thereafter.
Check mounting frame and loader hardware. (See FIRST 10 HOURS
in Lubrication and Maintenance section.)
-
Make sure hose bundle is routed to avoid contact with tractor.
-
Start tractor engine and check loader operation. (See procedure
in Attaching Loader section.)
-
Cycle all cylinders three or four times.
-
Retract bucket cylinders completely and lower to the ground.
-
Shut off tractor and remove key.
-
Check tractor transmission/hydraulic oil level. (See your tractor
Operator's Manual.)