Predelivery

After the loader has been completely set up, inspect it to be sure it is in good working condition before delivering it to the customer. The following checklist is a reminder of important points to inspect. Check off each item as it is found satisfactory or after proper adjustment has been made.

□ Service locks have been installed on loader.

□ Loader has been assembled correctly.

□ Mounting frame hardware is tightened to correct torque.

□ Tractor is properly ballasted.

□ Wheel tread is properly set.

□ Loader has been lubricated.

□ Loader responds correctly to controls.

□ Hydraulic connections do not leak.

□ Tractor transmission/hydraulic oil level is correct.

□ All safety decals have been replaced with text-free decals.

□ Tractor information plate has been installed.

□ All decals are in place and readable.

□ Anti-Spill System is installed and operates correctly.

□ Scratches are painted.

□ Hoses do not contact any sharp edges or hang too low below tractor.

□ This loader has been inspected and checked. To the best of my knowledge, it is ready for delivery to the customer.

(Date Set Up)______________________________

(Signature)________________________________