Recommended Set Up/Assembly Sequence

1. Prepare the tractor.

   1. Refer to Prepare the Tractor section.

   2. Locate and prepare loader mating surface.

2. Prepare the loader.

   1. Remove all crates, parts, and bucket from around loader assembly.

   2. Attach lifting straps to loader assembly and overhead hoist. Lower loader assembly to ground (horizontal).

   3. Remove and discard shipping banding, wire, and wood pallet.

   4. Cut paint mask rings off all cylinders.

3. Install hood guard on tractor.

4. Install mounting frames, braces, hydraulic control valve, hoses and parts on tractor.

5. Install loader on tractor.

6. Install Australian Code of Practice bundles.

7. Install bucket.

8. Perform final inspection and adjustments.