Carry Materials Safely



Be sure anyone operating the loader is aware of safe operation and potential hazards.

See the tractor Operator’s Manual for safe operational practices.

Do not exceed lift capacity of loader.

Be sure tractor is ballasted correctly.

Carry load low at all times.

If tractor is equipped with 4-WD, be sure it is engaged during loader operation.

Stop loader gradually when lowering or lifting loads.

To help prevent loss of control, do not use "FLOAT" position to lower loader.

DO NOT HANDLE ROUND OR LARGE SQUARE BALES. The loader is not approved for bale handling attachments.

Avoid handling loose or shiftable loads.

Reduce tractor ground speed when traveling over rough ground or when making turns.

Drive slowly through gates and doors.