First 10 Hours

□  Lubricate fittings on each side of loader. (See procedure in EVERY 10 HOURS in this section.)

□  Tighten mounting frame hardware on both sides. (See procedure in EVERY 50 HOURS in this section.)

□  Tighten front weight bracket hardware. (See procedure in EVERY 50 HOURS in this section.)

□  Tighten nuts on pivot pins and front frame on both sides of loader. (See procedure in EVERY 50 HOURS in this section.)

□  Check parking latch cap screw adjustment. (See procedure in EVERY 50 HOURS in this section.)