Operating Loader with Attachments from Other Manufacturers

John Deere loaders are designed to be used with John Deere attachments.

John Deere accepts no liability for damage or injury resulting from the use of attachments from other manufacturers, these risks must be borne solely by the user.

If using attachments from other manufacturers which are made compatible with John Deere loader carriers, the loader specifications may be affected as follows:

1. Attachment latching

   If using attachments from other manufacturers, always ensure that attachment is securely fitted on John Deere carrier prior to operating.

2. Self-leveling

   Always check self-leveling reaction before operating John Deere loader with attachments from other manufacturers.

   If self leveling does not respond as expected, the attachment level must be controlled manually using the appropriate lever to avoid falling loads.

3. Interference

   Check for interference and take necessary action to avoid them.

4. Maximum roll back and dump angles

   Roll back and dump angle can be affected.

   Avoid loads spilling back from the attachment by leveling the attachment manually using control lever, if necessary.

5. Loader specifications

   All the specifications of the loader may be affected.