Detach Bucket or Attachment

1. NOTE:

   
   W27066-UN-11SEP15

   
   W27171-UN-10DEC15

   A - Quick-Lock Pin

   B - Storage Position

   C - Hook

   D - Holder

   E - Holder Strap

   F - Bucket Pin

   Procedure is the same for all attachments. Bucket attachment shown.

   Start engine.

---




2. Release parking brake and place transmission in NEUTRAL.

3. Retract bucket cylinders and raise boom 460 mm (18 in) above the ground.

4. Engage tractor parking brake and place transmission in PARK. Shut off engine and remove key.

5. Remove quick-lock pin (A) from each side of bucket.

6. Store pins in storage position (B).

7. Start engine.

8. Extend bucket cylinders until the pin (F) releases from holder strap (E) on each side of bucket.

9. Lower loader boom, place transmission in REVERSE and move away from bucket. Holder (D) releases from hook (C) on each side of bucket.