Spray Computer Power Supply Cable for Other Equipment
A separate power supply cable with a 28-pole connector (with 3 poles used) for the EL-4 control box on the one hand and a 2-pole power plug on the other hand is available to use the control box with integrated computer when working with other implements. Connect the cable to 28-pole connector on the lower right hand side of the EL-4 control box and plug the other side of the cable into a 2-pole 12-V supply on the tractor. Fit the wheel sensor to a tractor wheel and connect the 4-pole plug to the upper right hand connection of the EL-4 control box. The computer can now be used as speed and hectare counter. The hectare function only works properly if the correct working width of the implement has been programmed as section C and (only) the boom section switch C is operated each time the implement is working.
|
