OMWZ72401: 724, 732 and 740 Trailed Crop Sprayers, Block File: WZ00085_0000341_19

Standard Machine and Accessories

The following separate (spare) parts are supplied with each machine. Please verify their presence.

[ ] 700 Series trailed crop sprayer operator's manual

[ ] EL-4 control box with integrated spraying computer

[ ] Control box mounting support

[ ] Wiring harness and connector (electric power supply)

[ ] PTO shaft with double side wide-angle coupling and user documentation

[ ] Drawbar eye adapter bushing
(for specific tow eyes only)

[ ] Spray boom counter weight

[ ] Control box for hydraulic operation (EHS-1, EHB-1 or EHB-2)

[ ] 2" filling hose with strainer and float, without couplings

[ ] Hose socket 2" with camlock, Firebrigade or C-coupling for filling hose (optional)

[ ] Hose socket 1.5" with camlock, Firebrigade or C-coupling for external pump filling connection (optional)

[ ] Hose socket 1.5" with camlock, Firebrigade or C-coupling for transfer valve (optional)

[ ] Parts Catalog (optional)

To prevent damage in periods of frost, the following parts may have been temporarily removed:

[ ] Suction filter jar including O-ring and filter element

[ ] Pressure line filter jar including filter element

[ ] End caps with U-plugs of various spray pipe sections

[ ] Hose sockets with U-plugs of various spray pipe sections

[ ] Pressure gauge

However, the machine may alternatively be prefilled with antifreeze (protection up to -20°C frost). Upon delivery of the machine, all small and loose parts are temporarily stored in the filling sieve or in the flushing system (if fitted).

The PTO shaft with user documentation is located at the platform. The counter weight may also be prefitted in the spray boom.

WZ00085,0000341 -19-03JUN05-1/1