Solution Tank
The machine is fitted with a polyethylene solution tank with a nominal tank volume of 2400 l (724 model), 3200 l (732 model) or 4000 l (740 model). The maximum tank volume is at least 5% larger than the nominal volume. This extra volume is required to allow for possible foaming. Make allowances for this when filling the tank, i.e. do not fill the tank with more than the nominal volume. The tank is mounted on the frame and is fully supported. The filling hole can be reached with a ladder (A) on the left front of the machine, over the steps reaching to the filling platform (B). To lower the ladder, lift the lowest step and unfold the ladder by turning it. When driving with the sprayer, the ladder should always be folded, otherwise it could be damaged. Be sure that the ladder is secured. |
|
CAUTION:
You must not enter the tank for purposes of cleaning or repair!
WZ00085,0000386 -19-17AUG05-1/1 |