|
Uncleaned empty containers must be stored in a storage room for crop protection chemicals.
The container label identifies if it must be rinsed and the correct method of disposal.
To clean the container, place the opening face-down over the rinsing head and push down until clean water flows. For bags place the tenter over the rinsing head, place bag over the tenter ensuring rinsing head is totally enclosed and press down on the tenter to rinse. Rinsing must be done with
clean water
. Clean water
|
may be obtained externally (via the filling hose) or sucked in from the rinse tank.
It is recommended to rotate the container while rinsing. Rinse for at least 30 seconds at a rinsing pressure of between 3 and 5 bar. Before the pressure selection valve, a separate pressure regulator has been fitted for this purpose, this has been set to a higher pressure than the chosen spraying pressure.
Also see "Chemical Inductor" near the beginning of the "Accessories" section.
|