Mechanical Safety

• Do not touch the machine while it is in operation or running.
• Safety provisions must not be removed or rendered inoperative.
• The permissible load on axle and tires must not be exceeded. Pay attention to this on fitting tires, loading the machine and transport speed.
• When travelling on public roads, the machine must be fitted with lighting according to the applicable statutory regulations.
• When driving on the public roads with a trailed sprayer, most countries require a statutory working brake to be fitted when drawing a certain total weight (including load). When a full tank must be transported by road, a hydraulic or pneumatic brake must be fitted. Check the statutory regulations in your country.
• You must not enter the tank for purposes of cleaning or repair!
• Never set the spraying liquid pressure higher than 15 bar, due to the maximum permissible pressure of the machine.
• Do not turn on the machine until you are sure nobody is in the danger zones.
• During repairs and maintenance work, the electric power must be switched off by means of the starting switch and removal of the plug from the socket.
• The ignition key must be removed in order that the machine cannot start unexpectedly or unintentionally.
• Welding work may not be carried out on the machine if it has been used to spray ammonium nitrate and/or contains residues of this chemical.

AG,WZ00009,163 -19-07AUG00-1/1