Hydraulic Oil Level

Do not operate the hydraulic system when oil level is below the upper part on sight-glass.

The oil level should be kept in the upper part on sight-glass. Always check oil level as follows:

1. Handler parked on level ground.
2. Engine stopped.
3. Boom fully retracted.
4. Boom fully lowered.

IMPORTANT: Oil level must NOT be checked immediately after the engine has been shut down. Wait until the oil has settled, then check level at sight glass.

NOTE: The oil tank can be equipped with a lockable filler cap.

OUCC020,0002010 -19-21MAR05-1/1