Changing Transmission Oil

causym CAUTION: Machine must be parked on level ground, with the boom assembly fully lowered, parking brake applied, engine stopped and all wheels chocked on both sides.

Proceed as follows:

1. Remove drain plug (A) and allow oil to drain into a suitable container.

2. Fill the system with new oil of the correct grade at dipstick/filler neck (B)

IMPORTANT: The transmission may/will not drain completely, therefore do not fill past the top mark on the dipstick.

Specification

Synchro-Shuttle Transmission Oil -Capacity 23 liters (6.1 US. gal.)
Power Shift Transmission Oil -Capacity 23 liters (6.1 US. gal.)

For correct oil type and grade, see Section "Fuel, Lubricants, Coolant and Capacities").

ZX1036980
ZX1033867


A-Drain plug
B-Dipstick/filler neck

OUCC020,000203E -19-29MAR05-1/1