Attachment hydraulic functions

General Information
  • First (I) hydraulic function with shut-off valve (A) for hydraulic carrier lock pins.


    A-Shut-off valve
    I-First hydraulic function

    ZX1037314

OUCC020,000206C -19-11APR05-1/6

  • First (I) and second (II) hydraulic functions for mechanical carrier lock pins.


    I-First hydraulic function
    II-Second hydraulic function

    ZX1037010

OUCC020,000206C -19-11APR05-2/6

    • First (I) and second (II) hydraulic functions with shut-off valve (A) for hydraulic carrier lock pins.


      A-Shut-off valve
      I-First hydraulic function
      II-Second hydraulic function

    ZX1037011

OUCC020,000206C -19-11APR05-3/6

      • First (I), second (II) and third (III) hydraulic functions with shut-off valve (A) for hydraulic carrier lock pins.


      A-Shut-off valve
      I-First hydraulic function
      II-Second hydraulic function
      III-Third hydraulic function

    ZX1037012

OUCC020,000206C -19-11APR05-4/6

        First Hydraulic Function

        Install attachment as described under "Attaching/Detaching Equipment (John Deere Carrier)" and "Attaching/Detaching Equipment (John Deere Mechanical Carrier)" in this Section.

        causym CAUTION: Always check locking pins before tilting or operating any attachment.

        To operate the attachment hydraulic function, connect hydraulic hoses to connectors (A).

        IMPORTANT: Place shut-off valve lever (B) in closed position to prevent accidental use of pin-locking system.

        Press the button (C) on the multi-function lever to operate the attachment hydraulic function.

        If necessary, place lockout switch (D) to position (E) to lock all attachment hydraulic functions or to position (F) to lock all attachment hydraulic functions and carrier crowd/dump.


        A-Hydraulic connectors
        B-Shut-off valve lever
        C-Button
        D-Lockout switch
        E-Attachment hydraulic functions locked
        F-Attachment hydraulic functions and carrier locked

    ZX1037008
    ZX1037341
    ZX1037009

OUCC020,000206C -19-11APR05-5/6

          Second and Third Hydraulic Functions

          The handler can be equipped with second and third hydraulic functions.

          Install attachment as described under "Attaching/Detaching Equipment (John Deere Carrier)" and "Attaching/Detaching Equipment (John Deere Mechanical Carrier)" in this Section.

          causym CAUTION: Always check locking pins before tilting or operating any attachment.

          To operate the attachment hydraulic functions, connect hydraulic hoses to connectors (A) for second hydraulic function and to connectors (C) for third hydraulic function.

          IMPORTANT: Place shut-off valve lever (B) in closed position to prevent accidental use of pin-locking system.

          Use switches as follows:

                    1.

                    Press part (II) of switch (E) to select second hydraulic function or part (III) of switch (E) for third function.

                    2.

                    Press the button (D) on the multi-function lever to operate the attachment hydraulic function.

                    3.

                    If necessary, place lockout switch (F) to position (G) to lock all attachment hydraulic functions or to position (H) to lock all attachment hydraulic functions and carrier crowd/dump.


                    A-Hydraulic connectors, second hydraulic function
                    B-Shut-off valve lever
                    C-Hydraulic connectors, third hydraulic function
                    D-Button
                    E-Switch
                    F-Lockout switch
                    G-Attachment hydraulic functions locked
                    H-Attachment hydraulic functions and carrier locked

    ZX1037013
    ZX1037014
    ZX1037015

OUCC020,000206C -19-11APR05-6/6