Suspension Mode (Option on 3220 and 3420)To engage the suspension mode, press upper part of switch (B) to "on" position. IMPORTANT: If the vehicle is started with the switch (B) in "on" position, the suspension is not engaged. In this case, to engage the suspension mode, first press lower part of switch (B) to "off" position then press upper part of switch to "on" position again. The operator presence switch in the seat must be depressed to allow suspension mode activation. The suspension mode function is independent of the position of the interlock switch (A) on the multi-function lever. The suspension mode can be engaged with the lockout switch in any position except position (C): Attachment hydraulic functions and carrier crowd/dump locked. IMPORTANT: The suspension mode cannot be engaged with temperatures under freezing point.
|
|
OUCC020,0002071 -19-11APR05-1/1 |