OMZ102387: 3215, 3220, 3415 and 3420 Telescopic Handlers(206801- ), Block File: OUCC020_00020C0_19

Pick-up Hitch (Option)

IMPORTANT: The maximum static load is 2000 kg (4410 lb). The maximum tow weight is 8000 kg (17635 lb) for 3215 and 3220 and 10000 kg (22045 lb) for 3415 and 3420 handler. This MUST NOT be exceeded.

Never use the automatic pick-up hitch to lift the rear of the machine, for example to remove rear wheels etc.

The machine must never be in motion with the hitch in its lowest position, except for the sole purpose of connecting or disconnecting a trailer. There must always be adequate clearance under the hook to prevent it coming into contact with the ground or any obstructions.

The automatic pick-up hitch (A) is raised and lowered by a hydraulic cylinder (B) and is fully self-supporting when locked in the raised position.

A-Pick-up hitch
B-Hydraulic cylinder

OUCC020,00020C0 -19-20APR05-1/5

Pick Up Trailer

Proceed as follows:

1. First ease the load on the latch (A) by raising the hitch by operating the pick-up hitch switch (B). To do so, make sure that rear auxiliary hydraulic function lock switch (C) is in unlocked position and that rear auxiliary function select switch (D) is on pick-up hitch position as shown.

2. Unlock the hitch by operating the release cable (E) whilst still holding the release position. Gently lower the hitch to ensure it is clear of the latch.

A-Latch
B-Pick-up hitch switch
C-Rear auxiliary hydraulic function lock switch
D-Rear auxiliary function select switch
E-Release cable

OUCC020,00020C0 -19-20APR05-2/5

3. With the hook (A) and trailer eye aligned, raise the hitch and ensure that the latch (B) has engaged, by lowering the hitch onto it. Ensure release cable is fully released.

A-Hook
B-Latch

OUCC020,00020C0 -19-20APR05-3/5

Tip a Trailer

Proceed as follows:

1. Connect trailer hose to the machine's quick coupler (A). Connect trailer electrics to electrical socket (B).

2. Press top of switch (D) to select rear auxiliary hydraulic function at coupler (A).

3. Press switch (C) to tip trailer.

A-Quick coupler
B-Electrical socket
C-Switch
D-Select switch

OUCC020,00020C0 -19-20APR05-4/5

Uncouple a Trailer

Proceed as follows:

1. Fully lower the trailer body.

2. Disconnect trailer hose from the machine's quick coupler (A). Disconnect trailer electrics from electrical socket (B).

3. First ease the load on the latch (C) by raising the hitch.

4. Unlock the hitch by operating the release cable (D).

5. Whilst still holding the release position, gently lower the hitch until the hook (E) is clear of the trailer eye.

6. Drive forward ensuring that there is adequate clearance between the hook (E) and the ground. Raise the hitch and ensure that the latch (C) is secured by lowering the hitch onto it. Ensure release cable is fully released.

A-Quick coupler
B-Electrical socket
C-Latch
D-Release cable
E-Hook

OUCC020,00020C0 -19-20APR05-5/5