Pallet Forks

Different pallet fork types are available:

  • 42 in. type for John Deere.
  • 48 in. type for John Deere.

Distance between pallet forks (A) can be adjusted. Proceed as follows:

1. Unscrew all four locking collars (B).

2. Slide forks (A) to an equal distance from center line, at the desired position.

3. Place locking collars (B) on each side of fork then secure.

Pallet forks can easily be removed from carrier frame. Proceed as follows:

1. Unscrew all four locking collars (B).

2. Remove quick-lock pins (C) then pins (D).

3. Slide fork supporting tubes (E) just enough so that forks (A) can be removed.

4. Slide back tubes (E) in place then secure with pins (D) and quick-lock pins (C).

causym CAUTION: It is recommended that pallet forks are laid flat on the ground for safe storage.


A-Forks
B-Locking collars
C-Quick-lock pin
D-Pins
E-Tube

ZX021524
ZX026330
ZX026331

OUCC020,0001CEA -19-11DEC03-1/1