Gear Shift Switch (Power Shift)

The 3220 and 3420 telescopic handlers can be equipped with a Power Shift transmission unit with fully synchronized 6/3 speed electro-hydraulic shuttle reverser coupled to a torque converter.

To shift gears, there are two alternatives:

1. Press upper part of the switch (A) on multi-function lever to upshift and lower part of switch (A) to downshift.
2. Press upper part (rabbit) of the switch (B) on armrest control panel to upshift and lower part (tortoise) of switch (B) to downshift.

NOTE: Using the switch (B) allows easier gear shifting while driving.

While shifting, the right hand side of the digital display (C) will indicate the gear engaged depending on FNR lever position:

• With FNR lever in "forward" position - 1F, 2F, 3F, 4F, 5F or 6F.
• With FNR lever in "Neutral" position - 1N, 2N, 3N, 4N, 5N or 6N.
• With FNR lever in "Reverse" position - 1R, 2R or 3R.

NOTE: See "Forward-Neutral-Reverse Lever (FNR)" in this Section.

A-Multi-function lever gear shift switch
B-Armrest control panel gear shift switch
C-Digital display

OUCC020,0002002 -19-18MAR05-1/1