Service Intervals
The intervals at which the various parts should be checked, lubricated, serviced or adjusted are based on the actual hours of operation as shown on the hour meter (A). The meter operates whenever the engine is running and shows the accumulated hours of engine operation. Always check to make sure that the hour meter is serviceable. The lubrication and periodic service intervals are for normal working conditions. These intervals should be shortened when operating under adverse conditions. If the machine is operated, for long periods, in extreme climatic conditions e.g. below -15°C (5°F) or above 33°C (91°F), the service schedules must be reduced to 50% of operating hours quoted. IMPORTANT: After servicing, cleaning or repairing your machine, reinstall any safety guards or shields before operating the machine again. |
|
CAUTION:
Do not lubricate or adjust the machine while the engine is running unless recommended to do so. Always use a safety channel if working under the raised boom.
OUCC020,0002024 -19-22MAR05-1/1 |