Changing Fuel Filters (Primary and Final)

1. Drain water and contaminates from fuel primary and final filters into a suitable container by opening the drain valve (A) on bottom of filter.

2. Unfasten filter retaining ring (B) and remove filter.

IMPORTANT: From primary fuel filter remove water trap (C) and attach it to the new filter.

3. Install new filter, ensuring that the marks on the filter and housing are properly aligned.

4. Tighten retaining ring (B) until it can be heard to engage.

5. Bleed the fuel system (see "Bleeding the Fuel System" in "Service-As Required" Section).


A-Drain valve
B-Filter retaining ring
C-Water trap

ZX1036970

Changing Primary Fuel Filter

ZX1036971

Changing Final Fuel Filter

OUCC020,0002030 -19-24MAR05-1/1