Setting Digital Display

Press and hold the Vehicle symbol , F1 button and F3 button together to access the following digital display setting menus:

  • User Set-Up
  • System Set-Up

    NOTE: This menu is for factory use only! Whenever the "System Set-Up" menu is selected, a code will be required to enter. For further information, contact your John Deere dealer.

  • Exit Menu
    • To exit the digital display setting.

Press F1 or F2 to toggle between the different menus.

Press F3 to access the "User Set-Up" menu (A).


A-User Set-Up

ZX1037022
ZX1037023

OUCC020,000210E -19-04MAY05-1/11

User Set-Up Menu

Press F1 or F2 to access the following functionality:

  • Clock setting.
  • Clock mode (12 or 24 hour).
  • Weight units (Kg or Lbs).
  • Digital display illumination
  • Digital display part number.
  • Digital display serial number.
  • ERR (Diagnostic Trouble Code).
ZX1037025

OUCC020,000210E -19-04MAY05-2/11

Clock setting

Press F3 to access the clock setting.

ZX1037025

OUCC020,000210E -19-04MAY05-3/11

To set the hours press the F1 button.

To set the minutes press the F2 button.

When the setting is correct press the F3 button.

ZX1037026

OUCC020,000210E -19-04MAY05-4/11

Clock mode

To change the clock mode (A) from the 12-hour mode to the 24-hour mode press the F3 button.


A-Clock mode

ZX1037027

OUCC020,000210E -19-04MAY05-5/11

Weight units

To change the weight units (A) from "k" for kilograms or "lbs" for pounds press the F3 button.


A-Weight unit

ZX1037028

OUCC020,000210E -19-04MAY05-6/11

Digital display illumination

Press F1 or F2 to adjust the display backlight intensity.


A-Illumination

ZX1037323

OUCC020,000210E -19-04MAY05-7/11

Digital display part number


A-Display part number

ZX1037029

OUCC020,000210E -19-04MAY05-8/11

Digital display serial number


A-Display serial number

ZX1037289

OUCC020,000210E -19-04MAY05-9/11

Diagnostic Trouble Code

To access the diagnostic trouble codes (A):

Press F1 or F2 to toggle between the different diagnostic trouble codes.

The diagnostic trouble codes for the following controllers will be generated:

  • Digital Display
  • TCU (Transmission Control Unit) Power Shift only

Refer to "Digital Display and TCU (Transmission Control Unit), Diagnostic Trouble Codes" in "Service - Diagnostic Trouble Codes" Section.

ZX1037290


A-Diagnostic trouble code

OUCC020,000210E -19-04MAY05-10/11

Exit Menu

To exit the digital display setting, press the F3 button.


A-Exit menu

ZX1037291

OUCC020,000210E -19-04MAY05-11/11