General Installation Instructions
Follow these guidelines to correctly install and maintain the GreenStar™ Lighbar system:
-
Install within reach of the operator.
-
Do not cover up decals or indicators.
-
Do not obstruct operator's view.
-
Do not store in direct sunlight.
-
Do not pressure wash lightbar.
-
Do not use harsh chemicals (such as solvents or gasoline) or unauthorized rubber cleaners and conditioners to clean the cup. Contact your John Deere Dealer.
The GreenStar™ Lightbar suction cup is intended to be attached on the front windshield of tractor cab.
IMPORTANT:
Mistreatment or misuse may damage a suction cup or otherwise create conditions which could cause the suction cup to fail, resulting in an unexpected release.
-
Do not allow anything to interfere with free movement of the plunger while the cup is attached. This could prevent the red line from alerting the user of vacuum loss.
-
Remove Lightbar and suction cup from windshield when not in use.
-
Keep suction cup clean.
-
Re-attach suction cup after 24 hours latest.
NOTE:
Read also instructions and cautions contained in the suction cup instruction manual.
|