| OCP - Overhead Control Panel Control Unit Diagnostic Trouble Codes |
| Control Unit |
SPN |
FMI |
Pri. |
Indicator Light |
Description |
Effect |
| OCP |
158 |
00 |
2 |
|
Battery Voltage High. |
Control Unit shutdown, Control unit functions not available. |
| OCP |
158 |
01 |
2 |
|
Battery Voltage Low. |
Control Unit shutdown, Control unit functions not available. |
| OCP |
623 |
05 |
2 |
|
Red Stop Lamp Failure. |
Red stop lamp is not available to signalize a stop lamp failure. |
| OCP |
624 |
05 |
3 |
|
Amber Warning Lamp Failure. |
Warning lamp is not available to signalize a warning lamp failure. |
| OCP |
628 |
12 |
2 |
|
Program Memory Failure. |
Control unit function not available. |
| OCP |
630 |
12 |
|
|
No Factory / Dealer Settings. |
Inital calibration cannot be called back with the reset switch. |
| OCP |
987 |
05 |
2 |
|
Protect Lamp Failure. |
Protect lamp is not available to signalize a protect lamp failure. |
| OCP |
1563 |
12 |
2 |
|
Incompatible Control Unit. |
No control unit function is available. |
| OCP |
300302 |
12 |
2 |
|
Powr-Savr Switch Component Failure. |
Internal problem to control the Powr-Savr interlock relay output, no Powr-Savr motor power available. |
| OCP |
300303 |
03 |
2 |
|
Powr-Savr Interlock Relay Failure To Open (Powr-Savr Motor Power Detected). |
Relay failure. |
| OCP |
300303 |
04 |
2 |
|
Powr-Savr Interlock Relay Failure To Close (No Powr-Savr Motor Power). |
No Powr-Savr motor power. Powr-Savr function can not be performed. |
| OCP |
300305 |
03 |
2 |
|
Kernel Processor Adjust Switch Failure. |
Probably kernel processor adjust switch does not work correctly. |
| OCP |
300306 |
03 |
2 |
|
Kernel Processor Adjust Abort Switch Failure. |
Probably kernel processor adjust abort switch does not work correctly. |
| OCP |
300307 |
03 |
2 |
|
Stationary Knife Away Switch Failure. |
Probably stationary knife away switch does not work correctly. |
| OCP |
300308 |
03 |
2 |
|
Stationary Knife Adjust Switch Failure. |
Probably stationary knife adjust switch does not work correctly. |
| OCP |
300309 |
03 |
2 |
|
Home Position Switch Failure. |
Probably home position switch does not work correctly. |
| OCP |
300310 |
03 |
2 |
|
Cutterhead Sharpen Switch Failure. |
Probably cutterhead sharpen switch does not work correctly. |
| OCP |
300311 |
05 |
|
|
Indicator Lamp Failure. |
|
| OCP |
300312 |
04 |
2 |
|
Row Guidance Enable / Disable Switch Failure. |
Probably row guidance enable / disable switch does not work correctly. |
| OCP |
300313 |
04 |
2 |
|
Metal Detector Calibrate Switch Failure. |
Probably metal detector calibrate switch does not work correctly. |