Fine Tuning 360 Rotary Harvesting Unit for Maximum Productivity

In most conditions, the 360 rotary harvesting unit should be run in the "fast" position of IVLOC-transmission. The harvesting unit features a two speed input gearbox:

  • 1 st speed is SLOW.
  • 2 nd speed is FAST.

Refer to the following tables to match input gearbox and IVLOC-transmission speeds with desired LOC:

OUZXMAG,0001D72 -19-03SEP04-1/4

  40-Knife Cutterhead
  IVLOC Transmission Harvesting Unit Gearbox
  Slow Fast 1 2
         
LOC        
6 mm( 0.24 in.) X   X  
7 mm (0.28 in.) X   X  
8 mm (0.31 in.) X   X  
9 mm (0.35 in.) X     X
10 mm (0.39 in.) X     X
11 mm (0.43 in.) X     X
12 mm (0.47 in.) X     X
13 mm (0.51 in.)   X X  
14 mm (0.55 in.)   X X  
15 mm (0.59 in.)   X X  
16 mm (0.63 in.)   X X  
17 mm (0.67 in.)   X X  
18 mm (0.71 in.)   X X  
19 mm (0.75 in.)   X X  
20 mm (0.79 in.)   X   X
21 mm (0.83 in.)   X   X
22 mm (0.87 in.)   X   X
23 mm (0.91 in.)   X   X
24 mm (0.94 in.)   X   X

 

OUZXMAG,0001D72 -19-03SEP04-2/4

  40-Knife Cutterhead
25 mm (0.98 in.)   X   X
26 mm (1.02 in.)   X   X

 

OUZXMAG,0001D72 -19-03SEP04-3/4

  48-Knife Cutterhead
  IVLOC Transmission Harvesting Unit Gearbox
  Slow Fast 1 2
         
LOC        
5 mm( 0.20 in.) X   X  
6 mm( 0.24 in.) X   X  
7 mm (0.28 in.) X   X  
8 mm (0.31 in.) X     X
9 mm (0.35 in.) X     X
10 mm (0.39 in.) X     X
11 mm (0.43 in.) X     X
12 mm (0.47 in.)   X X  
13 mm (0.51 in.)   X X  
14 mm (0.55 in.)   X X  
15 mm (0.59 in.)   X X  
16 mm (0.63 in.)   X X  
17 mm (0.67 in.)   X X  
18 mm (0.71 in.)   X   X
19 mm (0.75 in.)   X   X
20 mm (0.79 in.)   X   X
21 mm (0.83 in.)   X   X
22 mm (0.87 in.)   X   X

 

OUZXMAG,0001D72 -19-03SEP04-4/4