Use preferably:
-
Corn stationary knife (see "Stationary Knives" in section Cutterhead, Drive, Guards, Covers).
-
Corn curved or angled cutterhead knives (see "Cutterhead Knives" in section Cutterhead, Drive, Guards, Covers).
Use special milo rolls, if kernel processor is used (see "Kernel Processor Rolls" in section Harvesting Units and Attachments).
|
Install cover plate under feed rolls.
Attach and prepare rotary (row-independent) harvesting unit or depending on row space 4 or 6-Row Row-Crop unit according to Operator's manual recommendations.
|