Restarting Engine That Has Been Run Out of Fuel, John Deere POWERTECH® 8.1 L Engine

When the engine has been run out of fuel, the system must be primed.

IMPORTANT: The prefill cup must be used when filling the fuel filters to insure that the fuel is being filtered. If prefill cups are not available the filters are not to be removed. Proceed to bleeding the fuel system procedure.

2. Remove fuel filters and connect prefill cup to filter and fill filters with fuel.

3. Bleed air from system. See Bleeding Fuel System, John Deere POWERTECH 8.1 L Engine.

B-Prefill Cup
C-Fuel Filter

POWERTECH is a trademark of Deere & Company.

OUZXMAG,0001DB7 -19-09SEP04-1/1