Use preferably
-
Grass or universal stationary knife (see "Stationary Knives" in section Cutterhead, Drive, Guards, Covers).
-
Straight cutterhead knives (see "Cutterhead Knives" in section Cutterhead, Drive, Guards, Covers).
Install grass channel between cutterhead and blower fan. A stainless steel liner is available for gummy crop conditions.
NOTE:
Stainless steel liner does not replace the grass transition chute.
|
Install and adjust scrapers on attaching frame to auger on pickup (refer to pickup harvesting unit Operator's Manual).
Attach and prepare pickup harvesting unit according to Operator's manual recommendations.
NOTE:
See also "Adjusting Feed Roll Springs" in section Feeding System.
|