|
Remove engine tarpaulin, plugs from engine openings, and paper strips between fan belt and pulleys. Tension drive belt.
Check all seals and coolant level. Antifreeze and rust inhibitor should be left in the cooling system during the summer months as a protection against corrosion.
If rust inhibitor was added to the engine oil before storing the forage harvester, this oil can be used for approx. 25 hours at the beginning of the new season. Otherwise, drain the oil and fill crankcase with fresh oil of specified quality and viscosity.
|
Check battery. Check battery charge and electrolyte level. Recharge battery, if necessary.
Before starting the engine after longer storage periods: Remove fuse (3F19). Crank engine for 30 seconds - or until engine oil pressure indicator light goes out. This will ensure proper lubrication of all engine parts during the starting procedure. Reinstall fuse (3F19). Then start engine and run for approx. 5 minutes at half-rated speed.
Check all lines and seals for leaks. See your John Deere dealer, if necessary.
|