Adding Coolant
IMPORTANT: Add a recommended coolant (see "Fuel, Lubricants, Coolant and Capacities" Section). Never use a cooling system sealing additive. Never pour cold liquid into a hot engine, as this may crack the cylinder head or block. Do not operate engine without coolant. Add coolant when the cooling system is cold. Coolant level must be up to the mark below the upper edge of the header tank. |
CAUTION:
Danger of scalding! Remove radiator filler cap only when coolant temperature is below boiling point (wait a few minutes). Then loosen cap slightly to the stop to relieve pressure before removing cap.
OUZXMAY,000057A -19-19SEP02-1/1 |