OMZ92614 M8: 1170 Combine and 312, 314, 316, 319 Cutting Platforms (Combine From Serial No. 62613), Block File: ZX_OM1170009428_19

Rear wheels

After the first hour of operation and again after the first 20 to 25 hours of operation, check and tighten rear wheel bolts to 180 N·m (130 lb-ft).

Front wheels

After the first hour of operation and again after the first 20 to 25 hours of operation, check and tighten front wheel nuts to 550 N·m (400 lb-ft).

ZX,OM1170009428 -19-01SEP97-1/1