Deleting Data

This function allows to delete both trip (A)-(C) and total (B)-(D) counters, if necessary.

The total counters are accessible only in this function and are marked with a "+", as shown.

Proceed as follows:

Switch ON monitor (see "Switching On Combine Harvester Computer" in this Section) or go to the "Main Menu", then select "Data/Delete" function.

Clearing of total counters (B) or (D) is done by the "Delete" key. These counters are cleared one by one. Press the "Arrow" keys to displace the cursor (the dark bar) up or down to the desired counter, then press "Delete" function key, as shown.

Clearing of the trip counters (A) and (C) is done by the "Delete Trip" key. Both trip counters are cleared at the same time. "Delete Trip" function key can be pressed no matter where the cursor is.

Press "Return" key to return to the previous function or to the main menu.

A-Time Trip Counter
B-Time Total Consumption Counter
C-Area Trip Counter
D-Area Total Counter

ZX,OMSLC007310 -19-10DEC96-1/1