OMZ92614 M8: 1170 Combine and 312, 314, 316, 319 Cutting Platforms (Combine From Serial No. 62613), Block File: ZX_OMSLC007463_19

Move throttle lever forward until a speed of approx. 1200 rpm has been obtained.

Run a cold engine for approx. 1 to 2 minutes at this speed. At ambient temperatures below freezing, extend this warming up period to 2 to 4 minutes.

IMPORTANT: Never run engine without load for more than 5 minutes.

Do not increase engine speed to maximum rpm unless needle of coolant temperature gauge is in the green zone.

ZX,OMSLC007463 -19-31JAN96-1/1