Final Drives

The combine has two final drive units, one at each end of the front axle.

Change oil every 500 hours of operation.

IMPORTANT: Check the oil level every 100 hours. Clean the vent daily.

Capacity of each final drive: 3.0 L (0.79 U.S. gal).

IMPORTANT: Always use specified oil (see "Fuel, Lubricants, Coolant and Capacities" Section). Carefully clean area around filler cap before filling with fresh oil.

A-Oil Fill Cap
B-Breather Plug
C-Oil Level Check Plug
D-Drain Plug

ZX,OMSLC007734 -19-02JUN96-1/1