|
DURING THE FIRST 100 HOURS OF OPERATION
Perform service daily or once every 10 operating hours (see this section and "Fuel, Lubricants, Coolant and Capacities").
Do not idle the engine unnecessarily.
Check coolant temperature repeatedly.
Check engine oil and coolant level frequently. Look for signs of leaks.
|
If it becomes necessary to top up with engine oil during the break-in period, select an oil of a viscosity corresponding to the seasonal requirements and the information in the "Fuel, Lubricants, Coolant and Capacities" section.
Check that the hoses and hose clamps in the air intake system are secure.
Check drive belts and adjust if necessary.
|