|
When installing V-belts, slacken belt tensioners. Never use force to pry the belt over the edge of a sheave as this will rupture one or more cords and weaken the belt. V-belts stretch when new. Therefore, check the tension of a new V-belt several times during the first few days of use. More belts fail from being too slack than from being too tight.
Never use an aggessive cleaner to clean V-belts. Do not use petrol, benzine, turpentine or similar cleaning solvents.
|
-
soap-suds, or a
-
1:10 mixture of glycerine spirit
The life of a V-belt also depends on the condition of the V-belt sheaves. A damaged sheave will also damage the V-belt.
Slight fraying of the belt covering does not indicate belt failure. The frayed ends should be cut off.
IMPORTANT:
At the end of the harvesting season, remove V-belts and store in a cool, dry place to prevent damage from the elements.
|